The wax must be flexible but also firm and must definitely not be allowed to get too soft and sticky.
Apply the soft, flexible wax layer by layer over the eye that has been taped over. Apply the Derma Wax with the convex rounded side of the spatula and smooth the edges down so that grease and moisture cannot get underneath. Work in the Derma Wax out over the edge of the plaster. Smooth the Derma Wax surface and edges off with the fingertip, using a little bit of Grimas Cleansing Cream.
Now press the Artificial Eye into the Derma Wax construction. Use bits of Derma Wax to mould an upper and lower eyelid around the Artificial Eye.
Then you make a number of lumps, using Derma Wax taking into account that you use the same approach every time: take it out, soften it and apply it.
